Barron Heating AC Electrical & Plumbing Blog: Archive for the ‘Duct Repair’ Category

Does Your HVAC System Suffer From High Blood Pressure?

Wednesday, November 4th, 2015

Your furnace, heat pump or air conditioner is the heart of your comfort system.


It’s often said that your furnace, heat pump or air conditioner is the heart of your comfort system. Following the analogy further, your air ducts are its veins & arteries.

And just like high blood pressure is bad for your heart, high “duct static pressure” is bad for your heating and cooling system, your comfort – and your wallet.

When you go to the doctor for a check-up, common practice is for the doctor or nurse to measure your blood pressure. Our service technicians now have the instruments and training to do the same for your ducts when we do the seasonal tune-up, or a home and duct performance assessment.

We’ve been doing this for a while now, and the results are often eye-opening. The heating and cooling equivalent to 80 over 120 is “half an inch” of water column pressure for most systems. When we test the duct pressure, we now routinely find pressures significantly higher than this –often over double!

Why does this matter?

Higher Utility Bills: High pressures in the ducts leads to lower airflow. Lower airflow means lower efficiency. Lower efficiency means higher monthly utility bills.

Comfort: Lower airflow leads to poor distribution of conditioned air throughout the home, contributing to hot and cold spots, or the system not keeping up on the hottest or coldest days.

Noise: High static pressure is often a clue as to why a system is excessively noisy – the same repairs to reduce static pressure usually decrease noise as well.

Repairs: Low airflow causes furnaces to overheat internally, and air conditioners and heat pumps to not function smoothly. Many common expensive repairs – or premature total failure – are directly attributable to low airflow.

The good news is that identifying high static pressure allows us to prescribe the right medicine to make your system and your home happier! Each system is different – but most common airflow improvements are fairly simple and economical. And best of all, they pay for themselves through more efficient operation and lower utility bills.

Next time your HVAC contractor visits your home, ask your technician to take the time to check your ducts static pressure and explain the results. If you are having any comfort, dust or high utility bill issues, give a home performance trained contractor a call and they’ll explain your options for home & duct performance assessments.

Continue Reading

How to solve HOT and COLD rooms…

Wednesday, October 7th, 2015


Have you ever wondered why some rooms are not as comfortable as others, and sometimes an entire floor can be uncomfortable? This can be very frustrating however, the good news is it can be fixed. There are many reasons why this happens, but the most common issue is air flow. When an HVAC system is installed there are a lot of assumptions made and very few checks and balances to ensure the system is working properly.

The first step is to find an HVAC contractor who is trained, understands how air flow works in the home and is able to measure and test. The easiest repair is simply what is called air balancing. Dampers should have been installed when the house was built, but unfortunately many homes are lacking them. If your home is missing dampers, they can and will need to be added.

Your contractor will provide what is called a room by room load calculation to determine how much air flow is required to the rooms. He or she can then do simple steps to ensure the proper amount of air flow is being directed to each room.

The most important part of testing is to ensure your duct system is in good working order. It must be sized properly and free of any duct leakage. Both these problems can rob a home of the precious air that is needed to be comfortable. Duct systems can be repaired and sealed to make sure the right amount of airflow is being distributed throughout the house. In some cases it is necessary to replace the entire duct system to guarantee proper sizing, insulation and no duct leaks. A good duct system is key to making your home more comfortable and providing your family with the clean healthy air.

And there is another benefit. Unlike any other repair you do in your home, fixing your ducts can actually help pay you back. A good duct system will use less energy and save on monthly utility costs.

Continue Reading

AeroSeal Infographic

Monday, November 25th, 2013

AeroSeal is the fastest growing method to improve the duct system in your home. Recently highlighted on the Today Show and This Old House, it’s fast becoming a ‘standard’ improvement on any home performance project.  Visit www.BarronHeating.com/AeroSeal to watch an educational video on its use and function

Continue Reading